Fiberinthebox

A Pair of BIDI WDM Single Fiber 10/100/1000M 1310/1550 40km SC 1SC+2RJ45 Ethernet Media Converter

SKU#:FITB98606BGL
Model#: FMC1S2R-SF-35-40GA
Out of stock
A Pair of BIDI WDM Single Fiber Ethernet Conve er 10/100/1000M 1310/1550nm 40km SC 1SC+2RJ45
Media conve ers can be used anywhere in the network to integrate newer technology with existing equipment to suppo new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media conve ers can extend the productive life of the existing cabling as well as the active equipment.

Fiberinthebox.COM supply 10/100Base Ethernet Fiber Media Conve ers, 1000Base Gigabit Fiber Media Conve er,SFP Fiber Media Conve er, Options in singlemode dual fiber, multimode dual fiber and singlemode single fiber. We also supply Media Cove er Chassis, like 14 slot media conve er chassis and 16 slot media conve er chassis, used to manage the various media conve ers.
Features
AutoCross™: Automatically detects and configures the twisted pair po on the conve er to the correct MDI or MDI-X configuration. Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media conve er to monitor both the fiber and copper RX po s for loss of signal. Automatic Link Restoration: The medio conve ers will automatically re-establish link in all network conditions. Selectable speed setting: The conve er can be set to 10Mbps or 100Mbps. Both copper and fiber po s are automatically set to the same speed. Devices connect to duplex mode of link pa ner.

Key Features

10/100/1000Mbps auto-negotiation Suppo s IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control Suppo s MAC self-learning Standards: IEEE802.3, IEEE802.3u, IEEE802.3x, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX Po base VLAN LED status of Link, activity, Full/half duplex, speed and power on diagnostic function Extremely low power consumption and low heat Reliable and stable performance

Applications:

10/100/1000M Ethernet Network Distances
It use the 10/100/1000BASE-T to 1000BASE-X speed setting (back-to-back) to extend the distance between two 100BASE-T devices up to 80km. using single mode fiber without a repeater.

Specifications
UTP Po : 2-po RJ45 UTP Rate: 10/100/1000Mbps Fiber Po : Simplex SC, ST, FC available Fiber Rate: 1000Mbps Fiber Wavelength: 1310/1550nm Fiber Mode: Single-mode Distance: 40km LED Indicator: TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX. Power Supply: External Working Temperature: -20~75°C Relative Humidity: 5%~90%