Fiberinthebox 1G OEO Transponder, designed by us, are used for re-amplifying, re-shaping and re-timing the signals in the transmission process. It can save optical fiber resources and networking cost effectively, and solve problem that the transmission distance is too long to transmit. With advantages of small volume optical signals, economy and safety, convenient construction and etc, it is widely used in various optical transmission fields and long-distance relay transmission.
Attention: This item is card type, SFP to/from SFP po .
Features
| Suppo 2U Rack (16 Slots) and independent use as standalone unit | Suppo network management (Web SNMP, Console) |
| Suppo in-band management | Suppo ITUT prescribed DWDM/CWDM wavelength |
| Transmission rate:1Gbps | 3R function |
| Suppo Jumbo Frame | Transparent Transpo and very low delay |
| Suppo DMI function for SFP fiber module | Suppo Loopback test function |
| Suppo PRBS Generator and checker | Suppo hot plugging |
| Easy installation | Full State Led display |
Specifications
| Equipment function: 3R Repeater / Extender / Media conve er | |
|
Function Varieties of devices: Different kinds of Devices are available to meet customers’ different requirement.Flexible plus transparent access to services at different rates: Provide po s with different rate to suppo services such as Ethernet, PDH, SDH, ATM, etc.Relay type: Wavelength conversion, mode conversion, re-shaping and enlarging optical power.Relay transmission distance: 10KM, 20KM, 30KM, 50KM, 80KM, 100KM, 120KM or above.Manageable function：Provide varieties of network manageable mode, including SNMP, Web, CLI and telnet.Can be inse ed in Multi-services unified platform Managed Chassis |
|
| Transmission Distance: | |
| Up to SFP module (Max 80Km) | Local SFP: Suppo SFP/CWDM/DWDM,Specific optical parameters please refer different modules's parameters |
| Remote SFP: Suppo SFP/CWDM/DWDM,Specific optical parameters please refer different modules's parameters | |
| Network management information: Card type information | |
| SFP+ or XFP fiber module detection | SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power) |
| Link status detector | Enable/Disabled Loopback test function |
| Enable/Disable PRBS Generator and checker function | Rate select (10Gbase-Lan or Wan) |
| Remote card's status monitor (only in pairs) | Card type information |
| Power requirement: | |
| Rack-mountable: AC 85~220V OR DC -48V dual-supply, optional | Standalone: AC 220V OR -48V |
| Power consumption: ≤3W | |
| Work Environment: | |
| Operating Temp: 0~ 50 ℃ | Storage Temp: -10~ 70 ℃ |
| Humidity: 5%~90% (non-condensing) | |
| Dimension: | |
| Card: 11.5mm (W) × 78mm (D) | Standalone: 156mm (W) × 128mm (D) × 32mm (H) |
India
