Indoor CATV EOC slave with 2 RJ45 po s
FS302 supplies one RF hybrid signal input po , one RF CATV output po and two 100M full-duplex RJ45 output Ethernet po s to FSve access to both TV and computer. FS302 suppo s bandwidth set, and suppo s to limit he max uplink and downlink bandwidth.
Features
Good anti-jamming capability with OFDM (kind of MCM, Multi-Carrier Modulation) and cFSnnel-adaptive technology.Highly adaptable to network, amplifier and distributor Highly effective filter, lower interference to CATV Supply VLAN, IGMP and QoSSuppo SNMP, WEB and CLI managementSuppo remote software upgradeManaged intensively by central EOC, suppo TELNET managementNo need to configure, sta work once connected
Specification
| System Parameter | Technical Index |
| System Bandwidth | Physical layer data rate 200Mbps |
| IP data throughput 100Mbps per channel | |
| Modulation | OFDM;BSPK, QPSK, 1024/256/64/16/8-QAM |
| MAC Protocol | TDMA and CSMA |
| EOC technology | HomePlug AV |
| Carrying Capability | 253 per channel, total 1012 slaves |
| Protocol and Standard | IEEE 802.1Q |
| IGMP v1, v2 | |
| IEEE 802.1P QoS | |
| NMS | WEB; CLI; SNMP |
| Data Interface | Two 10/100Base-TX RJ45 input po |
| Auto MDI/MDIX | |
| Comply with 802.3, IEEE802.3u | |
| TV Interface | One RF po |
| Metric thread F type | |
| Output level: 108dBμV | |
| Inse ion Loss: <1.5dB | |
| Impedance: 75Ω | |
| Hybrid Interface | One RF hybrid signal output po s |
| Metric thread F type | |
| Frequency: 2-870MHz | |
| Output Level: 108dBμV | |
| Impedance: 75Ω | |
| Light Indicator | DATA (Cable connection LED) |
| ETH1, ETH2 (Ethernet po LED) | |
| SYS (System LED) | |
| PW (power LED) |
India
