Payment & Guarantee Support

SFP+ to SFP+ 10G 3R 2 ports Optical-Electrical-Optical

Model#: FITB-10G-3R-C-SFP
Price: US$ 843.60
Sold: 4436
Availability: In Stock
fiberinthebox-bbb-a-plus-certification fiberinthebox-product-certification

Fiberinthebox 10Gbps OEO Series are XFP-XFP or SFP+ to XFP or SFP+ to SFP+ Optical-Electrical-Optical type media conve er / repeater for connection between fiber to fiber 10Gbps equipment function as fiber mode conve er, or as fiber repeater for long distance transmission.
It's main applications are such as connection between fiber to fiber or fiber to copper 10Gbps equipment function as fiber mode conve er, or as fiber repeater for long distance transmission or OEO for network backbone(SAN, LAN, MAN).

It suppo SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.

Attention: This item is card type, SFP+ to/from SFP+ po . It could be inse ed into our 2U Multi-services unified platform Managed Chassis
3R Repeater Suppo Jumbo Frame
Transparent Transpo and very low delay Suppo ITUT prescribed DWDM/CWDM wavelength
Suppo DMI function for SFP+/XFP fiber module Suppo PRBS31 Pattern Generator and Checker function
Suppo Loopback test function Economic In-band Management function
Powerful Network Management function (Web, SNMP, Console) -used with AN-CH10 chassis Suppo hot plugging
Suppo 2U Rack (16 slots) and standalone use Full State Led display
Easy installation  
Performance Data: Technical Indexes Equipment function: 3R Repeater / Extender / Media conve er
Transmission Speed: 10Gb/s (9.95Gb/s-11.35Gb/s) Protocols: IEEE802.3ae (10Gbase-R/LRM)
Access Type: 10G LAN/ 10G WAN  
Interface Type:
A Type: SFP+ To/From SFP+ B Type: SFP+ To/From XFP
C Type: XFP To/From XFP  
Transmission Distance:
SFP+ module: Up to 40Km XFP module: Up to 80Km
Maximum Packet Forwarding Rate: 14,880,950/S  
Network management information: Card type information
SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power)
Link status detector Enable/Disabled Loopback test function
Enable/Disable PRBS Generator and checker function Rate select (10Gbase-Lan or Wan)
Remote card's status monitor (only in pairs) Card type information
Power requirement:
Rack-mountable: AC 85~220V OR DC -48V Standalone: AC 220V OR -48V
Power consumption: ≤4W  
Work Environment:
Operating Temp: 0~ 50 ? Storage Temp: -10~ 70 ?
Humidity: 5%~90% (non-condensing)  
Card: 11.5mm (W) × 78mm (D) Standalone: 156mm (W) × 128mm (D) × 32mm (H)