10GBASE-T Ethernet Media Conve er SFP+ Po
Fiberinthebox Cooper to fiber 10 Gigabit Media Conve er is one po 10G pluggable SFP+ and RJ45 po , suppo ing any compatible 10G SFP+ modules including suppo for following standards: 10GBase-SR, 10GBase-LR,10GBase-ER,10GBase-LRM, and 10GBase-ZR.
Features
| Suppo Jumbo Frame | Transparent Transpo and very low delay |
| Suppo ITUT prescribed DWDM/CWDM wavelength | Suppo DMI function for SFP+ fiber module |
| Suppo Loopback test function | Economic In-band Management function |
| powerful Network Management function(Web?SNMP?Console | Suppo hot plugging |
| Suppo 2U Rack (16 channel) and standalone use | Full State Led display |
| Easy installation | UTP cable length detection(only RJ45 interface) |
Applications
Specifications
| Performance Data: Technical Indexes | Transmission Speed: 10Gb/s |
| Protocols: IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-SR/LR/ER/ZR) | Access Type: 10G LAN |
| Interface Type: Type: RJ45 To/From SFP+ | |
| Transmission Distance: | |
| SFP+ module: Up to 80Km | 10Gbase-T: 100meters Cat .6a cable |
| Maximum Packet Forwarding Rate: 14,880,950/S | |
| Network management information: Card type information | |
| SFP+ module/ XFP module: it depends on the transmission distance of the module | |
| Link status detector | Enable/Disabled Loopback test function |
| UTP cable length detection (only RJ45 interface) | Remote card's status monitor (only in pairs) |
| Power requirement: | |
| Standalone: AC 220V OR DC -48V | Rack-mountable : AC 85 ? 220V OR DC -48V |
| Power consumption: ≤9W | |
| Work Environment: | |
| Operating Temp: 0~ 50 ? | Storage Temp: -10~ 70 ? |
| Humidity: 5%~90% (non-condensing) | |
| Dimension: | |
| Card: 11.5mm (W) × 78mm (D) | Standalone: 156mm (W) × 128mm (D) × 32mm (H) |
Figure 1: Card Type SFP+ and RJ45 po 10G Media Conve er
Figure 2: Standalone Type SFP+ and RJ45 po 10G Media Conve er
India
