Payment & Guarantee Support

10 to 15 dBm Output C-band 40 Channels In-Line EDFA for DWDM Networks

Price: US$ 1,749.90
Sold: 1679
Availability: In Stock
fiberinthebox-bbb-a-plus-certification fiberinthebox-product-certification

DWDM EDFA 40 channels Optical In- Line Amplifier DWDM-EDFA-LA-X

The DWDM-EDFA-LA-X is an In-line EDFA operates in the middle of an optical link designed for optical amplification between two network nodes on the main optical link. Using dual-stage pump laser design and internal Gain Flattening Filter (GFF) to compensate the erbium fiber gain variation, it is typically used as an intermediate point in the network to increase the DWDM channel power levels, provides optical output power up to 10~15dBmwhile maintaining low noise figure (NF) with the ability to amplify input signals as low as -25 dBm per channel. Software control is standard via an RS-232 interface for status monitoring and pump current adjustments.


In-line Amplifier, carries whole C-Band 1528nm ~ 1561nm of 40 channel on metro DWDM distance extension or single wavelength distance extension application 100GHz channel spacing input power?-25~-10dBm output power?10~15dBmLow Noise Figure: Typical 4.5dBHigh Flatness: Typical 1dB19” 1RU rack enclosureSC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC connectors are availableSingle or dual 110VAC, 220VAC, 100-240VAC and/or -48DC power supplyReliable 980nm and 1480nm pump lasers 10 years of operation life3 years warranty standardCompatible with Telecordia GR-1312-COREOEM is available
Perfect Network Interface: Ethernet, RS-485 and RS-232 po Suppo Telnet AGC (automatic gain control) maintains constant gain for each channel in the aggregated optical signal according to the gain parameter setting as long as the total output power does not exceed the maximum rated value, we can also make it as APC (automatic power control) circuit, if you need it, please contact at GFF (gain flattening filters) assures a flat gain response across the entire C-band and input power rangeProvides automatic power shutdown when aggregate input falls below the thresholdEmploy the intelligent temperature control system, the fan is on when the module temperature over 45?, meanwhile it will stop as the temperature is under 40?, which makes sure the thermal stability and fan’s long life-time, meanwhile, the professional air flow design can also ensure the best temperature stabilitySNMP network management is to provide a graphical user interface (GUI) to control the modules in realistic windows that model the devices
Structure Example
The DWDM EDFA from Fiberinthebox including 1+2+3.
Mechanical Structure
Picture Details
Front-panel Details
Backpanel Details
Other Details
Parameter Performance Unit
Operating Wavelength 40 channels 1528~1561 nm
Input Power Booster Amplifier -5~+10 dBm
In-line Amplifier -25~-10 dBm
Pre-Amplifier -35~-25 dBm
Output Power Max 23 dBm
Noise Figure Booster Amplifier 4.5 dB
In-line Amplifier 4.5 dB
Pre-Amplifier 4.5 dB
Gain Flatness 1 dB
Isolation Input Min 30 dB
Output Min 30 dB
Polarization Dependent Gain(PDG) Max 0.5 dB
Power Consumption   Max 15 W
Operating Temperature     0~50 ?
Operating Humidity     10~85 %
Storage Temperature     -40~70 ?
?: 110VAC, 220VAC, 100VAC~240VAC and -48VDC are optional